For the Final Week Progress....
 |
| Picture 1 |
In this picture, it shows how we joint our bamboos using the Elbow P.V.C pipe. After the pipe is placed at the end of the bamboo, we decided to tie it up.This is to ensure that the connection are more stronger.
 |
| Picture 2 |
This picture shows the early overall view on how the base of the 'rakit' looks like. At this moment, we were calculating on how big, we should design the sitting base from the "rakit'.
 |
| Picture 3 |
Mean while, in this picture we are testing the dome frames. For the dome, we used a bamboo which has a diameter of 3cm or less, this is to make the bamboo bends more easily.
 |
| Picture 4 |
This picture shows the bamboo base for the sitting purposes. The bamboo was tied up using rubber from used motorcycle tubes. The bamboos were cut in half because we want to reduce the weight of the overall 'rakit' weight in the end.
 |
| Picture 5a |
 |
| Picture 5b |
This picture 5a and 5b were showing the base for sitting purpose were laid on top of the main frame.
 |
| Picture 6 |
This picture is showing how the dome looks like after all the main frames were fixed on the main base of the 'rakit'. At this moment also, we were testing the strength of the bamboo base.
 |
| Picture 7 |
This picture shows, the almost complete 'rakit' except the tire tubes and the cover for the dome.
 |
| Picture 8 |
This picture, shows nabil preparing the tires for the purpose of supporting the 'rakit'. we bought the tire at a tire shop behind KFC Sg. Dua.
 |
| Picture 9 |
This picture shows the final product and ready for testing. This picture was taken before the final night.
No comments:
Post a Comment